•
Locate the Oxygen Inlet filter from the
accessories / consumables box
; this is contained in a plastic bag which
should be removed (photo
5-A
).
•
Install the Oxygen Inlet filter at the rear of the Ventilator main unit, tightening the threaded connector until
hand tight against the oxygen inlet ensuring it is orientated as in photo
5-B.
•
Locate the Oxygen supply connection hose from the
accessories / consumables box
; this is supplied coiled
with tie wraps that should be removed (photo
5-C
).
•
The Oxygen supply connection hose can now be connected to the Ventilator and then connected to the local
oxygen source as shown in photo
5-D.
5-A
5-B
5-C
5-D
Assembly Instructions
–
Step 5
–
Hospital Oxygen Connection
