•
Unbox and remove the packaging from the smaller of the two boxes (
Box 1
) and separate into the three
parts; Ventilator main unit, ventilator screen and the Accessories / Consumables box as shown in photo
2-A.
•
Unpack the main ventilator unit and place this on the trolley prepared in Step 1. Align the two locating pins
on the base of the ventilator with the locating holes on the trolley base (photo
2-B
).
•
Lower the ventilator main unit onto the trolley base such that its sits level as shown in Photo
2-C.
Note that
the front and rear of the unit is not flush at this point.
•
Push the ventilator main unit towards the front of the trolley such that the locating pins are locked in and
the unit is flush with the trolley as shown in photo
2-D.
Then tighten the black locating screw thread as
shown in photo
1-C.
2-A
2-B
2-C
2-D
Assembly Instructions
–
Step 2
–
Main unit attachment to trolley
