•
Locate the Two black power cords (1 x UK Mains Plug to IEC female connector and 1 x IEC female to IEC male
connector) from within the
accessories / consumables box
and remove the cable ties (photo
6-A
).
•
Connect the UK Mains Plug to IEC female connector to the bottom IEC male connection socket on the trolley
side and the IEC female to IEC male connector to the top IEC female socket as shown in photo
6-B.
•
Connect the other end of the IEC male connector to the main ventilator module and using a
Philips
screwdriver
secure the cable with the small white cable clamp as shown in photo
6-C.
•
The Unit can then be connected to the UK mains supply and powered on at the wall and on the back of the
main unit behind the clear protective cover (photo
6-D
).
6-A
6-B
6-C
6-D
Assembly Instructions
–
Step 6
–
Power Supply Connection
