9
Dongguan Ortur Intelligent Technologies Co., Ltd.
https://ortur.tech/obsidian
No. 56 Maxin Road, Changping Town, Dongguan 523565, Guangdong Province, China
7. A response is given by the
Ortur Laser Master M400 v1
motherboard,
acknowledging the command by sending a
[MSG: Restoring defaults]
The firmware update procedure is now complete!
The
Ortur Laser Master M400 v1
is ready to be used normally.
Important Note:
Any customization of the GRBL settings prior to firmware update was overwritten.
If they are necessary by any reason they should be introduced again.
Possible reminders for GRBL settings customizations:
•
For the use of the
Ortur YRR
and
Ortur YRR 2.0
•
Installation of a 3rd party Z-axis adjuster (Y Max Travel setting)
