4
Dongguan Ortur Intelligent Technologies Co., Ltd.
https://ortur.tech/obsidian
No. 56 Maxin Road, Changping Town, Dongguan 523565, Guangdong Province, China
3. Depending on how accurate the button presses are performed, this operation
might need to be repeated.
4. The press buttons are successful when “
ORTUR LASER
” device appears in
“This PC” as a drive.
Step 2 - Enable Firmware mode on your Ortur
1. Connect your
Ortur Laser Master M400 v1
via USB directly to your computer -
do not use USB Hubs. Keep the
Ortur Laser Master M400 v1
in Off State;
2. On the front of your
Ortur Laser Master M400 v1
motherboard press the
following sequence of buttons:
•
Press and Hold the POWER button for 5 seconds
•
Without releasing the held POWER button, after 5 seconds elapse, tap
RESET button once.
V1.3 Motherboard
Max-Pro Motherboard
