A D A P T I N G F O R T H E D O C T O R / T E C H N I C I A N
English
INSTRUCTIONS FOR REPLACING THE PELVIC BAND
Remove the plastic caps at the ends of the pelvic band by removing the
respective screws (fig. A and B).
Pull out the screws at both ends that can be found underneath the caps (fig. C)
and remove the pelvic band (fig. D).
Attach the new pelvic band and fix using the previously removed screws (fig. C)
Replace the caps and fix using the appropriate fixing screws (fig. A).
INSTRUCTIONS FOR FIXING THE PELVIC BAND
If required, the pelvic band, which is supplied movable, can be blocked
using the mechanism of the band itself as shown in the following.
Remove the plastic caps at the ends of the pelvic band by removing
the respective screws (fig. A snd B).
Select the wedges with the desired angle (the angle has to be the same
on both sides.)
Move the pelvic band using one hand. With the other hand insert the wedges
in the respective receptacles on the mechanism below the caps (fig. E).
Replace the caps and fix using the appropriate fixing screws (fig. A).
Proceed in the same way for the opposite mechanism.
1
2
3
4
5
6
7
8
9
10
English
A
B
D
C
E
