OrthoAccel Technologies AcceleDent Aura, Инструкция по применению

Страница: 23 / 28

23
Direction for Use AcceleDent® Aura Back to Contents
Environmental Specifications
Electromagnetic Requirements.
The Activator complies with all applicable and required standards for
electromagnetic compatibility.
• It can radiate radio frequency energy and if not installed and used in
accordance with the instructions may cause harmful interference to
other devices in the vicinity.
• Portable and mobile RF communications equipment can also affect
the Activator performance and care should be taken to minimize such
interference. However, there is no guarantee that interference will not
occur in a particular installation.
• It would be good practice to avoid using the activator in extremely
close proximity to other electronic equipment.
Electromagnetic Emissions
The Activator is intended for use in the electromagnetic environment
specified below. The customer or the user of the unit should assure that it
is used in such an environment.
Emissions Test
Electromagnetic
environment-guidance
Compliance
Harmonic
emissions
IEC 61000-3-2
Voltage
fluctuations/
flicker
emissions
IEC 61000-3-3
The Activator uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
The Activator is suitable for use in all establishments other
than domestic and those directly connected to the public
low-voltage power supply network that supplies buildings
used for domestic purposes.
RF emissions
CISPR 11
RF emissions
CISPR 11
Group 1
Class B
Not Applicable
Not Applicable