Orthman 1tRIPr, Руководство оператора

Страница: 24 / 53

HYDRAULICS NOTES
STANDARD MANIFOLD BLOCK IDENTIFICATION
The 1tRIPr
®
XD is equipped with a hydraulic manifold block located near the top link center mast plates, which directs oil to multiple cylinders that must perform
together to accomplish a specific function. The hydraulic manifold block may be unique to the configuration of your machine. Narrow Transport (NT) machines are
equipped with a different manifold block. Refer to the next page for NT manifold block identification. Below is a port identification chart of the hydraulic manifold
block.
HYDRAULIC MANIFOLD BLOCK #180-332
PORT HOSE ASSIGNMENT FUNCTION
FOLD TRACTOR TO MANIFOLD PRESSURE I SUPPLIES OIL TO MANIFOLD TO EXTEND WING FOLD CYLINDERS
UNFOLD TRACTOR TO MANIFOLD RETRACT I SUPPLIES OIL TO MANIFOLD TO RETRACT WING FOLD CYLINDERS
LAWP TRACTOR TO MANIFOLD PRESSURE II SUPPLIES OIL TO MANIFOLD TO LIFT MACHINE
LAWR TRACTOR TO MANIFOLD RETRACT II SUPPLIES OIL TO MANIFOLD TO LOWER MACHINE
LP1
MANIFOLD TO LEFT WING FOLD
CYLINDER1 (BASE END)
SUPPLIES OIL TO LEFT WING FOLD CYLINDER 1 DURING FOLDING
LP2*
MANIFOLD TO LEFT WING FOLD CYLINDER
2 (BASE END)
SUPPLIES OIL TO LEFT WING FOLD CYLINDER 2 DURING FOLDING
LR1
MANIFOLD TO LEFT WING FOLD CYLINDER
1 (ROD END)
SUPPLIES OIL TO LEFT WING FOLD CYLINDER 1 DURING UNFOLDING
LR2*
MANIFOLD TO LEFT WING FOLD CYLINDER
2 (ROD END)
SUPPLIES OIL TO LEFT WING FOLD CYLINDER 2 DURING UNFOLDING
RP1
MANIFOLD TO RIGHT WING FOLD CYLIN-
DER 1 (BASE END)
SUPPLIES OIL TO RIGHT WING FOLD CYLINDER 1 DURING FOLDING
RP2*
MANIFOLD TO RIGHT WING FOLD CYLIN-
DER 2 (BASE END)
SUPPLIES OIL TO RIGHT WING FOLD CYLINDER 2 DURING FOLDING
RR1
MANIFOLD TO RIGHT WING FOLD CYLIN-
DER 1 (ROD END)
SUPPLIES OIL TO RIGHT WING FOLD CYLINDER 1 DURING UNFOLDING
RR2*
MANIFOLD TO RIGHT WING FOLD CYLIN-
DER 2 (ROD END)
SUPPLIES OIL TO RIGHT WING FOLD CYLINDER 2 DURING UNFOLDING
TP
TONGUE CYLINDER TO MANIFOLD (BASE
END)
SUPPLIES OIL TO TONGUE CYLINDER DURING MACHINE LIFTING
TR
TONGUE CYLINDER TO MANIFOLD (ROD
END)
SUPPLIES OIL TO TONGUE CYLINDER DURING MACHINE LOWERING
P3 MANIFOLD TO LIFT CYLINDER (BASE END) SUPPLIES OIL TO LIFT CYLINDER 1 DURING MACHINE LIFTING
R3 MANIFOLD TO LIFT CYLINDER (ROD END) SUPPLIES OIL TO LIFT CYLINDER 1 DURING MACHINE LOWERING
P4 MANIFOLD TO LIFT CYLINDER (BASE END) SUPPLIES OIL TO LIFT CYLINDER 2 DURING MACHINE LIFTING
R4 MANIFOLD TO LIFT CYLINDER (ROD END) SUPPLIES OIL TO LIFT CYLINDER 2 DURING MACHINE LOWERING
* - Port is not used on toolbars with only 2 wing fold cylinders (12R30 and smaller configurations)
7 - 1 6 - 6