Orthman 1tRIPr Скачать руководство пользователя страница 22

Страница: 22 / 53

FIELD SETTINGS

NARROW TRANSPORT TOOLBAR STANDS

Bar stands

Bar stand pin

“FIELD-READY” BAR STAND PLACEMENT.

Narrow Transport

1tRIPr

machines are equipped with bar stands that differ from the bar stands of

standard toolbar machines. In order for proper machine folding, these bar stands must be rotated inward as shown, rather than raised up as they do on standard toolbar
machines.

AVOID CRUSHING.

Be sure the weight of the machine in fully supported by the tractor and carrier

lift hydraulic cylinders before removing bar stands from the storage position.

DANGER

6 - 3

6 - 2

FIELD OPERATION

(CONTINUED)

Rigid wing lock position

Lock pin storage position

Rigid wing lock pin

RIGID OPERATION.

For Rigid operation in the field: With wings completely unfolded, move Rigid wing lock pin from Lock pin storage position and install into

Rigid wing lock position. This will keep wing from floating up.

NOTE:

TOOLBAR WILL NOT BE ABLE TO FOLD WITH WINGS LOCKED DOWN.

WING LEVELING.

Factory setting for wing level bolts allows no downward wing position from level. If wings become out of adjustment, these bolts can be

moved. Wing leveling bolts can also be adjusted so that wings will float down below factory setting. Smaller

1tRIPr

configurations will have 1 wing level bolt on

each wing. Larger

1tRIPr

configurations will have 2 wing level bolts for each wing (shown below). If there are two wing level bolts per wing it is important that

these bolts are adjusted so that both of them make contact with the wing so the load is distributed evenly.

To adjust Wing leveling bolts: 1. Loosen Jam nut. 2. Adjust bolt or bolts. 3. Tighten Jam nut. Recommended Tools: 1 13/16 end wrench.

NOTE:

JAM NUTS ARE IMPORTANT FOR PROTECTING THE THREADS IN THE TAPPED PLATE AND SHOULD NOT EVER BE REMOVED FROM THE ASSEMBLY.

Wing leveling bolts making

contact on wing plate

Wing leveling bolts

Jam nuts

Содержание 1tRIPr






















































Результаты поиска

Содержание 1tRIPr

Отзывы:

Бренды по названию

Популярные бренды

Orthman 1tRIPr, Руководство оператора

Результаты поиска

Содержание 1tRIPr

Отзывы:

Бренды по названию

Популярные бренды