ORTEC EASY-MCA-2K, Руководство пользователя

Страница: 21 / 46

931044C / 1014 2. GETTING STARTED
15
!
In MAESTRO, issue the Services/Edit Detector List... command to display the Master
Instrument List. If the EASY-MCA is not on the list, cycle its power by disconnecting
and reconnecting its power cable, then rerun the MCB Configuration program.
2.4.2. The MCB Configuration Program “Hangs” While Trying to Locate the
EASY-MCA
If MCB Configuration “hangs” (i.e., fails to run to completion), click on Cancel, then cycle the
power to the EASY-MCA by disconnecting and reconnecting its power cable. The MCB
Configuration program will close. Re-run MCB Configuration.
2.4.3. The EASY-MCA Does Not Respond In MAESTRO
If MCB Configuration successfully locates the EASY-MCA but the unit does not respond within
MAESTRO, cycle the power to the EASY-MCA by disconnecting and reconnecting its power
cable.
For further assistance, contact your ORTEC representative or our Global Service Center.