ORTAL Space Creator 120 Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 67

ORTAL Space Creator 120 Скачать руководство пользователя страница 65

65

MyFire App

The MyFire app requires the Wi-Fi kit to operate with the fireplace. The Wi-Fi kit does not automatically come with the fireplace and
must be ordered.

IMPORTANT: For safety/communication purposes, the 10-button handset must be located within 26 feet of the receiver.

To download the MyFire app, search “MyFire” at the Apple App Store or Google Play.

Operating Instructions

For setup and operating instructions of the MyFire app, see the Homeowner’s Fireplace Operation Manual, or visit the Ortal website
or www.myfireapp.com.

MyFire Wi-Fi Box

The MyFire Wi-Fi router box provides the Wi-Fi connection that allows the MyFire App to operate the fireplace. This part is included
with the optional Wi-Fi kit. Wi-Fi kit does not automatically come with the fireplace and must be ordered.

Part

Radio Frequency

Power Supply

Wireless Communication

MyFire Wi-Fi Box

2.4 GHz

Connects to Receiver

WPA2 authentication
AES 256-bit encryption security
Compatible with IEEE 802.11 b/g/n

«
...
63
64
65
66
67
»

Содержание Space Creator 120




































































Отзывы:

Нет отзывов