Operator's manual
Ch
ap
ter
:
Gen
er
al
In
fo
rm
at
io
n
4
General Information
This manual is intended for: Transporters - Installers - Users - Maintenance and Disposal personnel
Please read this manual carefully and in its entirety, as it contains important information relating to the safe and efficient operation of the device.
This manual is an integral part of the product and is included only for the device to which it relates.
This manual should be stored securely for the entire useful life of the device so that it may be referred to as needed. In the event a used device
is sold, it must be sold together with the manual and any appendices. The manufacturer assumes no liability for direct or indirect damages to
persons, property or animals caused by use of the device in conditions other than those set out in this manual. The manufacturer reserves the
right to make changes without notice to this documentary material or to the device to which it refers.
Safety pictograms:
Danger indicates a condition or situation that may cause death or serious injury.
Warning indicates a condition or situation that may cause moderate injuries
.
Note indicates additional information, explanations or hints.
Identification
Manufacturer:
OROTIG Srl
Via XXV Aprile 47
37014
–
Cavalcaselle di Castelnuovo del Garda
Ph.: +39 045 6400865, FAX +39 045 6401104
E-mail: [email protected]
–
web: www.orotig.com
Device:
L0F102HZ
LASER WELDER MOD. LDT REVO-S, SPOT 0,15 C/W. CAMERA.
L0F102HN
LASER WELDER MOD. LDT REVO-S PLUS, SPOT 0,2 C/W. CAMERA.
L0F200HZ
LASER WELDER MOD. REVO 15000-S, SPOT 0,15 C/W. CAMERA
L0F200HN
LASER WELDER LDT 15000 REVO-S PLUS, SPOT 0,2 C/W. CAMERA
The identification plate on the device displays its electrical characteristics and complete identification information.