Operator's manual
Ch
ap
ter
:
U
se
16
Inside welding chamber
1) LED lamps with adjustable intensity
2) Encoder User/welding parameters.
3) Exhaust smoke grid
4) Exit radiator cover/shielding gases
5) Air/gas tap
Use
Please read the
Safety Information
section before using the device
.
Recommendations
Before beginning regular use of the device it is recommended checking to ensure that it is in suitable working condition and that there are no
defective or worn parts. Make sure that there are no defective, damaged or worn parts; perform any regular maintenance or repairs that may be
required.
Positioning and ergonomics
Microscope eyepieces
Remove the caps that protect the stereo microscope, insert the eyepieces and, once positioned properly in the housing, tighten the fixing screw.
Store the caps and eyepiece wrappers for future use.
One of the eyepieces has a crosshair for sighting, this is usually positioned on the right tube of the stereo microscope. The diopter
dial may be adjusted: once the eyepieces are positioned properly, rotate the dial clockwise or counterclockwise depending on the
focus you wish to achieve. Refer to the scale printed on each eyepiece.
1
2
3
4
5