Orolia Spectracom VelaSync 1232, Руководство пользователя

Страница: 146 / 268

1.
Navigate to INTERFACES > REFERENCES: GNSS 0 .
2.
The survey status (ACQUIRING, COMPLETE, or progress in percent) is displayed
under the line item Survey Progress.
Note: Once a survey has been initiated, the Survey Progress may not
be displayed right away until the receiver has completed its ini-
tialization process.
3.3.3.6 GNSS Receiver Offset
The Offset setting in the GNSS configuration window ( INTERFACES > GNSS 0 > " Edit ")
allows you to enter an offset to the GNSS time and 1PPS reference in order to account for
antenna cable delays or other latencies (entered and displayed in nanoseconds).
By setting the correct Offset value, you can offset the system’s on-time point by the Off-
set value to compensate for the antenna and in-line amplifier delays. Under typical con-
ditions, the expected cable and amplifier delays are negligible. You can calculate the delay
based on the manufacture’s specifications.
The offset range is ±½ seconds (i.e. ±500 ms, or ±500 000 000 ns). The default value is
0 nanoseconds, and the resolution is 1 nanosecond.
Configuring a GNSS receiver offset
To configure the GNSS receiver offset:
1. Navigate to Interfaces > References: GNSS Reference
2. Click on the GEAR button next to the GNSS Reference. The GNSS 0 window will
open:
134
CHAPTER
3
•
VelaSync 1232 User Manual Rev. 4
3.3 Managing References