Orolia Spectracom EC20S, Руководство пользователя, Страница: 92 / 110

EPSILON CLOCK MODEL EC20S Spectracom
User’s Manual
92
GNSS CONFIGURATION OID Description (Ref.)
ec20s-GNSS-CFG-ANTENNA-MODE 78
ec20s-GNSS-CFG-ANTENNA-LATITUDE 79
ec20s-GNSS-CFG-ANTENNA-LONGITUDE 79
ec20s-GNSS-CFG-ANTENNA-ALTITUDE 79
ec20s-GNSS-CFG-GPS-CONSTELLATION-MODE 80
ec20s-GNSS-CFG-GLONASS-CONSTELLATION-MODE 81
ec20s-GNSS-CFG-GALILEO-CONSTELLATION-MODE 82
14.1.3 SNMP TRAPS
Trap events are asynchronous SNMP messages sent by the EC20S upon changes of some configuration
parameters or when an alarm is raised or cancelled. These parameters have an accessible-for-notify
access authenticated by the Trap community (which is defaulted to
‘ public ’ ).
Traps are sent by the EC20S to destination addresses which can be set via the “ SNMP Setup ” web page
or via the SNMP protocol (see 14.1.2 TRAPS CONFIGURATION or 14.1.2 SNMP CONFIGURATION
PARAMETERS).
Traps are sent by the EC20S if the Traps transmission is enabled. The Traps transmission can be
enabled/disabled via the “SNMP Setup” web page . Each trap event can also be enabled/disabled via the
same web page.
Refer to the MIB Description file to get detailed information about each trap (values definition, values
range) under the ‘DESCRIPTION’ section.
TRAP OID Description (Ref.)
ec20sGeneralHardwareFault 43
ec20sGpsFault 44
ec20sExternalPpsFault 45