Orolia Spectracom EC20S Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 110

Orolia Spectracom EC20S Скачать руководство пользователя страница 73

EPSILON CLOCK MODEL EC20S

Spectracom

73

User’s Manual

then transits to 0D reception mode. That means that the GNSS
receiver tracks only one satellite channel and then improves the
accuracy of the time.

- Stationary

The GNSS antenna is stationary and its accurate position is input
by the user. The accurate position so input is then set in the
GNSS receiver which then transits to 0D reception mode. That
means that the GNSS receiver tracks only one satellite channel
and then improves the accuracy of the time.

- Mobile

The  GNSS  antenna  is  not  stationary.  The  GNSS  receiver
computes  and  delivers  the  antenna  position  every  second  so
that the EC20S (with  the GNSS  antenna)  can be moved.  In this
case,  the  GNSS  receiver

doesn’t

transit to the 0D reception

mode.

79.

GNSS LATITUDE, GNSS LONGITUDE, GNSS ALTITUDE

Geographical coordinates of the stationary GNSS antenna position that is applied in the
GNSS Stationary mode (see above GNSS Mode).

Unity: Latitude and Longitude in degrees-minutes-seconds-milliseconds (for the web
interface) and milliseconds only (for the SNMP interface). Altitude in meters (for both web
and SNMP interface).

80.

GPS CONSTELLATION

Defines whether the GPS satellites constellation is part of the GNSS synchronization source
or not:

- Yes

The GPS satellites constellation is part of the GNSS
synchronization source.

- No

The GPS satellites constellation is not part of the GNSS
synchronization source.

81.

GLONASS CONSTELLATION

Defines whether the GLONASS satellites constellation is part of the GNSS synchronization
source or not.

- Yes

The GLONASS satellites constellation is part of the GNSS
synchronization source.

«
...
71
72
73
74
75
...
»

Содержание Spectracom EC20S















































































































Отзывы:

Нет отзывов