Ormed OptiFlex-K1, Руководство по обслуживанию

Страница: 7 / 14

6. Bill of material for service parts OptiFlex-K1
Position Description Ordernumber
7
2 Fixation screw GN534-32-M5sw
Washer DIN125D6A2
Countersunk screw DIN933M5x20A2
3
Knee electronics complete 0.0037.041
4 Fixation screw GN534-32-M5sw
Washer DIN125D6A2
Countersunk screw DIN933M5x20A2
Distance disk DIN988D6x12x0,3
6 Footplate 0.0037.045
7 Fixation screw GN534-40-M6sw
Rubber puffer complete for angle joint 0.0037.202
9 Connection hand held programming unit 2.0037.004
10 + 12
Power switch (ON/OFF) with connection 0.0034.245
11 Fuses cap 0.0034.246
Fuses 1 AT 0.0000.005
14
Hand held programming unit with spiral cable OptiFlex 0.0037.062
Protection for hand held programming unit 0.0037.103
Holder K1 hand held programming unit 0.0037.076
15 Spiral cable hand held programming unit 2.0037.035
16 Holding clip 0.0031.004
17
Housing cover OptiFlex-K1 with sticker 0.0037.205
18 Housing cover OptiFlex-K small 0.0037.206
19 Spiral cable black for potentiometer 0.0037.007
20 Motor control K1 2.0037.901RevB
21 Motor complete 0.0037.075
22 Wire set 2.0037.005
23 Power supply electronics 0.0034.244
24 Lip 2.0037.105
Wire for lip 0.0031.300
25 Spindle complete K1 with alu profile 0.0037.210
Power cord USA version 0.0034.011
Option: Frame adapter add-on-kit 0.0037.204