IG-245-EN version 05; 13/02/2020
22
Installation
General Instructions
mb
.m
5. Installation
When installing the
mb
.m in its location, it is essential
to comply with the applicable standards for electrical
installations in electrical networks, in addition to local
legislation. The instructions listed in this document must be
observed for the electrical installation.
The pressure exerted on the ground by the
mb
.m with the
switchgear installed is around 2 kg/cm
2
.
The site must be visited in advance to check if vehicles can
have access and if there is sufficient space for the unloading
operation, taking into account the distances to overhead
lines, slopes, etc.
These protection measures, in addition to the wheels
installed for sea transport in the HC-type container, must
be removed once the equipment is installed and before its
commissioning.
If the
mb
.m is fitted with an oil filter, its shut-off valve should
be opened.
5.1. Location
The site location should be precisely defined, indicating
the alignment levels and the heights of the reference
points, such as: roads, kerbs, milestones, pavilions, fences,
electricity pylons, etc.
Содержание velatia mb.m Series
Страница 42: ...Notes General Instructions mb m Notes IG 245 EN version 05 13 02 2020 42...
Страница 43: ......