Orlanski Orligno 600, Инструкция по эксплуатации и руководство по обслуживанию

Страница: 3 / 32

3
1. Hot air blower destination
Wood gasification hot air blower type ORLIGNO 600 is commonly used in industrial buildings or
other facilities as: warehouses,workshops, hangars,tents or outbuildings in places where there's
no heating installation. They're also used as a source of hot air in technological purposes in drying
houses of wood, grains, herbs or fruits.
ATTENTION!
Using fuel different than the recommended not guarantees optimum boiler operation
and achieving parameters featured in technical data. It can also affect durability of the
boiler and its components.
ATTENTION!
Using fuel different than the recommended is treated as wrong boiler operation and
resultant performance irregularities cannot be reason for complaint.
ATTENTION!
ORLIGNO 600 is equipped in controller with wide temperature range fit for every
purposes. Controller protects boiler against overheating with blow fan turning off and
back fan activation.
2. Principle of work
Gasification boilers utilize process of dry, pyrolitic wood distillation. During wood burning with
limited amount of air, wood changes into charcoal. Gasification process creates large amount of
wood gases which are directed to ceramic nozzle and burned in flame form in bottom chamber.
This method of wood burning efficiently make use of wood as a fuel.
Heat is transfered through loading, burning chamber's walls and vertical heat exchanger to
circulating cold air between inner and outer ORLIGNO 600 bodies.
Heated air is then blown directly through outlet located in upper part of hot air blower to the
premise.
STAge fOUR
Exhaust gases at temp. 160°C
are emitted through boiler flue
STAge ONe
Wood drying
and degassing temp. 450°C
STAge TwO
Burning of mixed wood gases with
secondary air at temp. 560°C
STAge THRee
Burning up the flame and heat
emission at temp. of 1200°C