Orlanski Orligno 600, Инструкция по эксплуатации и руководство по обслуживанию

Страница: 18 / 32

To adjust boiler door one should
a) Remove the door
b) Loosen screw
c) Rotate both hinges 360°
d) Screw up the nut.
ATTENTION!
Door adjustment needs to be done on both hinges!
6.3. fan maintenance
It is important to keep both fans cleaned. Keeping the fan blades cleaned directly influences hot air
blower. It is recommended to take off front fan cover to remove ash that may leads to fan power
decrease and may damage the fan. It is acceptable to clean the fan blades with brush with soft
bristle or vacuum cleaner.
Cleaning of both fans should be done at least once a year after or before heating season.
blocking nut
6.2. Hot air blower tightness
It is important to assure tightness, mostly door tightness. Leaks cause that exhaust gases escape
to boiler room but most importantly it may leads to uncontrolled burning. To assure door tightness,
rope of upper door needs to be controlled and qresed at least once a 2 weeks with any gresce or oil.
This assures that rope adhesives correctly to door frame. Hot air blower tightness can be assured
also by hinges regulation.