10
UM0972225 A 01
Figure 19
Figure 20
Aux wires open = Monitor standby.
Aux wire 1 = activate selected camera (wire2).
Aux wire 2 = activate Cam toggle 1 to 4.
TCH
for the tachometer.
KEY
for + and - key functions on AUX1/2.
C-+
Aux wires open = activate Cam 1 or Monitor standby.
Aux wire 1 = activate Cam toggle up 1 to 4.
Aux wire 2 = activate Cam toggle down 1 to 4.
Pulses per meter
Set this value to the amount of pulses the tachometers generates
per meter. (0 - 250).
Cam to activate
Select wich camera should be activated when tacho speed is within
selected range. (C1 - C6).
Cam on if speed >=
(0 - 130)
Tacho low limit, Camera not activated when tacho < low limit.
.... and speed <
(0 - 130)
Tacho high limit, Camera not activated when tacho > high limit.
Both menus Cam if speed >= and .. and speed < are connected;
Camera activated when tacho >= low limit and tacho < high limit.
The 2 conditions together must be active to switch the camera.
3.3.11. Default settings
See figure 19. This option opens the menu to restore the factory
default settings. Select the number of the factory settings that you
require (39 = default Orlaco settings).
Contact ORLACO for further information. Select the option ‘Restore
defaults’ to restore the factory settings. See figure 19.
3.4. Info
This user manual describes the functions of the software version
indicated on this Monitor (see Figure 20).
3. Service menu
