9
UM0972225 A 01
Figure 14
Figure 17
Figure 15
3.3.7. Scanning
This option opens the camera scanning submenu. See Figure 14.
This menu has the following options:
Scan sequence
This option selects the cameras from which images are to be
shown in sequence.
Scan interval
This option selects how long a camera image is displayed.
3.3.8. Camera switch
This option configures the type of video switch that is used. See
Figure 15.
‘OFF’
-if no camera switch is used
→
1 camera system.
‘2C’
-when only 2 cameras are connected to the 4 channel switch.
‘3C’
-when only 3 cameras are connected to the 4 channel switch.
‘4C’
-for the combination with the external switch 0404240 for 4
cameras
→
4 camera system.
3.3.9. Front camera
This option opens the front camera submenu for the 7” HLED Monitor.
This enables the front camera functionality (a statutory obligation).
Function AUX wire,
see figure 16.
Defines the function of the AUX1 & AUX2 switching wires (grey
and yellow). Select
TCH
for the tachometer function (Tacho to
AUX1 and hand brake to AUX2) or
ZOO
for the camera zoom func-
tion (only available in combination with an auto focus camera).
Use in this case the AUX1 & AUX2 switching wires to zoom in and
out. Select
KEY
to block the keyboard fully by activating the wire
AUX1.
Select
Q+-
to select the
next
and
previous
camera with the AUX switch
wires.
3.3.10. Tacho settings
see figure 18.
Settings related to switching a camera based on tacho speed:
AUX wire function:
Select the function of the AUX1 and AUX2 wires.
OFF
AUX wires no function.
C12 with the use of the digicoax switcher 0404240
;
Aux wires open = Monitor standby.
Aux wire 1 = activate Cam 1.
Aux wire 2 = activate Cam 2.
C23 with the use of the digicoax switcher 0404240,
Aux wires open = activate Cam 1.
Aux wire 1 = activate Cam 2.
Aux wire 2 = activate Cam 3.
C1+
3. Service menu
Figure 18
Figure 16
