Orla CDP 202, Руководство пользователя, Страница: 35 / 108

35
CONNECTIONS
BLUETOOTH
This is the socket where to insert the Bluetooth Receiver unit that allows to connect a Bluetooth transmitting
unit (smart phone, tablet, etc) to the instrument audio system.
USB TO COMPUTER
It is possible to connect the instrument to a computer using the USB port located in the back panel of the
instrument and control the Midi parameters.
MIDI CONNECTIONS
The Midi IN connector receives the Midi data from an external Midi device which can be used to control the
instrument. The Midi THRU connector retransmits any data from the Midi IN directly to other Midi devices.
The Midi OUT connector transmits Midi data generated by the instrument to other Midi devices.
PEDALS
These two jack plugs are used to connect the pedals available with the instrument. They can be switch pedals
for the piano functions but it is also possible to use a Volume pedal.
STAGE CONCERT – it is supplied with a Sustain Pedal. Connect it to the Pedal Input
Sustain/Sostenuto obtain the Sustain effect when used.
CDP202 – It is supplied with a complete set of 3 pedals. Insert the mono jack to the Pedal Input
Soft/Expression and the stereo jack in the Pedal Input Sustain/Sostenuto.
NOTE – The STAGE CONCERT can also use a set of 3 pedals (optional). Same connection as in
CDP202.
VOLUME PEDAL – Connect the volume pedal to the Soft/Expression Pedal Input (it is necessary
to configure the instrument
–
see Pedal 3 assign paragraph.).
LINE IN SOCKETS
There are two inputs (Left and Right) and they are used to send the audio signal of an external instrument to
the internal amplifier.
LINE OUT SOCKETS
There are two outputs (Left and Right) and they are used to send the audio signal out an external amplifier,
mixer console or recording equipment. To connect the instrument in Stereo to an external amplification
system connect both Left and Right outputs.
HEADPHONES
Two headphone set can be plugged in for private practice. They disconnect the speaker system and allow
you to play without disturbing the others being disturbed by outside noise.
DC IN SOCKET
This is the connection to power. Connect the adapter to this socket to power the instrument. Use only
original adapter.