Orla CDP 202, Руководство пользователя, Страница: 13 / 108

13
Release the SELECT button while still holding down the FLUTE CELESTE button and press now
the VOCAL voice button
The two voices are now selected and they can be played at the same time.
SPLIT
When the SPLIT button is pressed (its Led will start blinking) the instrument automatically splits
the keyboard in two parts and a different voice is automatically selected on the left part of the
keyboard. The SLOW STRINGS Voice is automatically selected to the left part of the keyboard and
the display will indicate:
After a few seconds the SPLIT button Led will stop blinking and the display will indicate:
The instrument is now in Split mode with SLOW STRINGS on the left and GRAND PIANO on the
Right. It is possible to select a different voices for the left section.
To select a new voice press the SPLIT button (its Led is blinking) and select a new voice from the
voice buttons available in the control panel.
After you have selected the voice wait a few seconds until the SPLIT button Led stops blinking.
The new voice is now selected and saved in memory.
In order to save the new selected Split configuration for future use, after the instrument is switched
off, it is necessary to save the new selection in a Memory Registration.
There are 20 voices available in the control panel and each one can be used for the Left Voice.
Using the PLAYER CHOICE 1 and PLAYER CHOICE 2 it is also possible to select any voice
from 142 voices available in the internal library of sounds.
See the full list at the end of the manual.
SPLIT POINT
If necessary it is possible to change the Split Point:
-
Press the SPLIT button and hold it for a few seconds until the display shows:
-
The number 55 is related to the note midi number.
-
To change the Split Point, there two possible solutions: