PROFESSIONAL
SuRvEILLANcE SYSTEM
cPIn002659
17
four channel digital video recorder
SC144
applying ViDeo regional coVer
a
Select channel to apply regional cover.
b
Check the tickbox and select a number to allocate to the
masking region. Up to 4 masking regions can be applied
to a channel.
c
Select
Set
and drag a box in the channel to apply
masking region.
d
Right click to confirm setting the masking region.
MoVing TiMe anD channel TiTle Display
a
Check the tickbox to select item to move.
b
Select
Set
to move item.
a
Select time or channel and drag to preferred location.
21 system > PtZ conFig
PTZ Config menu allows the configuration of communication
parameters between Pan/Tilt/Zoom devices and DVR. This DVR
is capable of controlling PTZ cameras.
›
channel:
Camera channel that the PTZ device is connected
to. This number corresponds to the BNC video input on the
rear panel of the DVR.
›
proTocol:
There are numerous supported communication
protocols between DVR and PTZ device. Select the protocol
that matches the device.
›
aDDress:
One DVR can be connected to multiple PTZ
devices. This address is assigned to the PTZ device.
This address is used when communicating with a system
connected to multiple PTZ devices.
›
bauDraTe:
Rate of the DVR sending signal or pulses to
the PTZ device. Select the baudrate that matches the PTZ
device.
›
DaTa biTs:
Size of the data information in a communication
packet sent to the PTZ device. Select the data bit size that
matches the PTZ device.
›
sTop biTs:
Size of the stop information in a communication
packet sent to the PTZ device. Select the stop bit size that
matches the PTZ device.
›
pariTy:
Parity bit is information included into the
communication packet for error detection. It makes sure
that the packet sent from the DVR is identical to the packet
received by the PTZ device. Select the parity that matches
the PTZ device.
