http://www.orion.ua
3
gas or electric burner, hotplate or heated oven.
Avoid touching hot surfaces. Use the cover and handle.
Use the kettle with the correct matching power base as supplied (and vice versa).
Do not use any attachments or accessories other than those that come together with
the unit.
This product is intended for normal domestic/household use only.
This kettle only be use with the base provided ,do not change to any other bases.
WARNING: Do not remove the lid while the water is boiling.
READ AND SAVE THESE INSTRUCTIONS
Switch
Spout
Handle
Base
Water window
Power indicator
Lid
Filter
Body
HOW TO USE YOUR AUTOMATIC KETTLE.
Before first use remove all packaging materials from the kettle and power base.
With the power switch in the “OFF” position and the kettle removed from the base, fill
the kettle to the desired level. Do not fill above the MAX mark.
(The first time the kettle is used, or it has been unused for a long period of time, it is
recommended that the kettle be rinsed, filled to maximum and boiled. The water
should then be discarded, the kettle rinsed and refilled with cold water.)
CAUTION: If the kettle is overfilled there is a danger that boiling water may be
ejected from the spout.
Place the cordless base on a dry level surface.
Place the kettle on the base.
NOTE: The kettle must only be used with the matching cordless base supplied.
Before operating the kettle ensure that the kettle is filled to the Minimum mark.
Ensure the kettle is in the “OFF” position (switch up) and connect the power supply
cord to a power outlet of the same voltage and frequency as detailed on the Product
Identification Plate.
To start the kettle heating, push the switch to the “ON” position (switch down). The
power indicator light will glow.
When the water has boiled the kettle will switch “OFF”. If required, the water may be
brought back to the boil by pressing the switch to “ON”.
