TGPS-9084GT-M12 Series User
Manual
ORing Industrial Networking Corp
58
LACP Enabled
Lists each switch port for each group ID. Check to include a port in an
aggregation, or clear the box to remove the port from the aggregation.
By default, no ports belong to any aggregation group. Only full duplex
ports can join an aggregation and the ports must be in the same speed
in each group.
Key
The
Key
value varies with the port, ranging from 1 to 65535.
Auto
will
set the key according to the physical link speed (10Mb = 1, 100Mb = 2,
1Gb = 3).
Specific
allows you to enter a user-defined value. Ports with
the same key value can join in the same aggregation group, while
ports with different keys cannot.
Role
Indicates LACP activity status.
Active
will transmit LACP packets
every second, while
Passive
will wait for a LACP packet from a partner
(speak if spoken to).
Save
Click to save changes
Reset
Click to undo changes made locally and revert to previous values
LACP System Status
This page provides a status overview for all LACP instances.
Label
Description
Aggr ID
The aggregation ID is associated with the aggregation instance.
For LLAG, the ID is shown as '
isid:aggr-id
' and for GLAGs as
'
aggr-id
'
Partner System ID
System ID (MAC address) of the aggregation partner
Partner Key
The key assigned by the partner to the aggregation ID
Last Changed
The time since this aggregation changed.
Last Changed
Indicates which ports belong to the aggregation of the
switch/stack. The format is: "
Switch ID:Port
".
Refresh
Click to refresh the page immediately
Auto-refresh
Check to enable an automatic refresh of the page at regular
intervals
