TGPS-9084GT-M12 Series User
Manual
ORing Industrial Networking Corp
47
LLDP Neighbor Information
This page provides a status overview for all LLDP neighbors. The following table contains
information for each port on which an LLDP neighbor is detected. The columns include the
following information:
Label
Description
Local Port
The port that you use to transmits and receives LLDP frames.
Chassis ID
The identification number of the neighbor sending out the LLDP
frames.
Remote Port ID
The identification of the neighbor port
System Name
The name advertised by the neighbor.
Port Description
The description of the port advertised by the neighbor.
System Capabilities
Description of the neighbor's capabilities. The capabilities include:
1.
Other
2.
Repeater
3.
Bridge
4.
WLAN Access Point
5.
Router
6.
Telephone
7.
DOCSIS Cable Device
8.
Station Only
9.
Reserved
When a capability is enabled, a (+) will be displayed. If the
capability is disabled, a (-) will be displayed.
Management
Address
The neighbor's address which can be used to help network
management. This may contain the neighbor's IP address.
Refresh
Click to refresh the page immediately
Auto-refresh
Check to enable an automatic refresh of the page at regular
intervals
Port Statistics
This page provides an overview of all LLDP traffic. Two types of counters are shown. Global
counters will apply settings to the whole switch stack, while local counters will apply settings to
specified switches.
