TGPS-9084GT-M12 Series User
Manual
ORing Industrial Networking Corp
42
Label
Description
Auto Configuration
Check to enable IPv6 auto-configuration. If the system cannot
obtain the stateless address in time, the configured IPv6 settings
will be used. The router may delay responding to a router
solicitation for a few seconds; therefore, the total time needed to
complete auto-configuration may be much longer.
Address
Specify an IPv6 address for the switch. IPv6 address consists of
128 bits represented as eight groups of four hexadecimal digits
with a colon separating each field (:). For example, in
'fe80::215:c5ff:fe03:4dc7', the symbol '::' is a special syntax that
can be used as a shorthand way of representing multiple 16-bit
groups of contiguous zeros; but it can appear only once. It can
also represent a legally valid IPv4 address. For example,
'::192.1.2.34'.
Prefix
Specify an IPv6 prefix for the switch. The allowed range is 1 to
128.
Router
Specify an IPv6 address for the switch. IPv6 address consists of
128 bits represented as eight groups of four hexadecimal digits
with a colon separating each field (:). For example, in
'fe80::215:c5ff:fe03:4dc7', the symbol '::' is a special syntax that
can be used as a shorthand way of representing multiple 16-bit
groups of contiguous zeros; but it can appear only once. It can
also represent a legally valid IPv4 address. For example,
'::192.1.2.34'.
Save
Click to save changes
Reset
Click to undo any changes made locally and revert to previously
saved values
