IAR-142-/142+-3G User Manual
ORing Industrial Networking Corp. 9
3.2 Wall Mounting
Besides Din-rail, the router can be fixed to the wall via a wall mount panel, which can be
found in the package.
Wall-Mount Kit Measurement
To mount the router onto the wall, follow the steps:
Step 1:
Screw the two pieces of wall-mount kits onto both ends of the rear panel of the router.
A total of six screws are required, as shown below.
Step 2
: Use the router, with wall mount plates attached, as a guide to mark the correct
locations of the four screws.
Step 3
: Insert four screw heads through the large parts of the keyhole-shaped apertures, and
then slide the router downwards. Tighten the four screws for added stability.