![Origin Acoustics SBR41 Скачать руководство пользователя страница 9](http://html.mh-extra.com/html/origin-acoustics/sbr41/sbr41_installation-manual_1651360009.webp)
15
14
SOUNDBARS INSTALLATION USER MANUAL
SOUNDBARS
INSTALLATION USER MANUAL
Diagram 8
Finalizing the Installation
Once the speaker has been wired, secure the Soundbar to the wall by sliding it
over the screws. Make sure to feed the wires into the wall as you prepare to mount
it to avoid pinching, kinking or disconnection during the mounting process. Your
new Soundbar is now ready for your listening enjoyment.
Depending on the complexity of your system, there are several possible
adjustments to provide the best possible sonic experience:
Most audio/video receivers (AVR’s) have some type of test program that plays
a signal through each channel to allow you to balance the output. This is best
performed from the principle listening position.
There will also be equalization (EQ) controls to adjust the frequency response as it
is effected by the parameters of the room.
If you are using a dedicated subwoofer, adjusting the balance and crossover
point between the subwoofer and your Soundbar is critical; the ideal balance
will provide deep warm bass without overshadowing the mids and highs that are
so critical in a musical performance. This may take a few days and several small
adjustments to get it right.
Lastly, be aware that different sources, BluRay Disc Players, Cable TV, streaming
music will all have slightly different volume levels and EQ curves. Even different
television channels may vary in their sonic presentation. This is normal and
something you can adjust to your preference.
Perfectioning the Sound
0.25 - 0.5”
(6 - 12mm)
Speaker
Wire
LEFT
CENTER
RIGHT
• SBR43-50 TO SBR43-85 WIRING WITH 3 PIN PHOENIX CONNECTOR
• SBR41 & SBR41-LCR WIRING WITH SINGLE PHOENIX CONNECTOR
3 X Pair Wires
1 X Pair Wires