13
12
SOUNDBARS INSTALLATION USER MANUAL
SOUNDBARS
INSTALLATION USER MANUAL
Once the mounting screws are installed and the wire hole has been drilled, it is
time to run the wires.
Each soundbar will have an individual pair of speaker wires for each speaker:
Diagram 5: The SBR41 & SBR41-LCR models will have 1 pair of wires to connect
to the single speaker, and can be mounted each as either a Left, Center, or Right
speaker.
Diagram 6: The SBR43-50 - SBR43-85 range of models will have 3 pairs of wires to
connect to the each of their 3 internal speakers.
Each pair of speaker wires will have a positive (+) and negative (-) connection.
Check your speaker wire for the indication along the wire to differentiate between
the two. Make sure you use the same wire to connect to (+) and (-) on both the
speaker and the amplifier/receiver.
Strip the insulation ½’’ from the end of the wire. Run the speakers out of the
hole in the wall and use the connectors to attach the correct wires to the speaker
terminals. The terminals operate by putting the wire inside the terminal. After the
wire is inserted, use a screwdriver to turn the screw, and it will lock the wire in
place. Lastly, make sure the insulation is not inserted into the hole in the terminal
as it will not allow the wire to make a connection.
NOTE: On the SBR41 & SBR41-LCR models, ensure you connect the appropriate
channel, Left, Center and Right, on both the speaker and the amplifier/receiver. If
not, the positional steering of the movie soundtrack will be incorrect.
(See Diagram 8).
Wiring Connection
Diagram 6 |
SBR41 & SBR41-LCR WIRING OPTIONS
Diagram 7 |
SBR43-50 TO SBR43-85 WIRING
TV
Mounting Screws
Mounting Screws
SBR43-85
SBR43-80
SBR43-75
SBR43-70
SBR43-65
SBR43-60
SBR43-55
SBR43-50
SBR41
SBR41-LCR
LEFT
RIGHT
3 X Pair Wires
CENTER
SBR43-75
SBR43-55
SBR41
SBR41-LCR
SBR43-7
5
SBR43-55
SBR4
1
SBR4
1-L
CR
SBR43-7
5
SBR43-55
SBR4
1
SBR4
1-L
CR
TV
LEFT
CENTER
RIGHT
TV
LEFT
RIGHT
1 X Pair Wires
1 X Pair Wires
CENTER
1 X Pair Wires
