7
6
SOUNDBARS INSTALLATION USER MANUAL
SOUNDBARS
INSTALLATION USER MANUAL
Total Speak
er Height 6”
(152mm)
Total Speaker Width 11
57/64
” (302 mm)
Ensure Template is Level Before Drilling Pilot Holes
SBR 41
Wall Mount Template
Screw Distance from Edge 3
3/8
” (85 mm)
Soundbar Mounting Steps
The first step in mounting the Soundbar is to determine the optimum position
based on the room parameters and your television location.
Care must be taken to ensure the soundbar is mounted securely.
It is best to check the angle of the television and use that line as a guide to avoid
the appearance that the soundbar is mounted misaligned. Be advised that there
are several relative angles in the room that may not be square. Use a level to
establish the ideal position based on gravity.
NOTE: The soundbars use a keyhole mounting system (See Diagrams 1, 2A & 2B).
The Soundbar will slide down 3/8'' below the template location, until the screw
rests at the uppermost position in the mounting element. Take this into account
when marking screw holes.
Make sure there is enough room to accommodate the soundbar in the selected
location.
Diagram 2A
Diagram 1
3/8''
3/8''
Diagram 2B
Total Speak
er Height 6”
(152mm)
Total Speaker Width 11
57/64
” (302 mm)
Ensure Template is Level Before Drilling Pilot Holes
SBR 41
Wall Mount Template
Screw Distance from Edge 3
3/8
” (85 mm)
MOUNTING TEMPLATE
MOUNTING TEMPLATE
Total Speak
er Height 6”
(152mm)
Total Speaker Width 11
57/64
” (302 mm)
Ensure Template is Level Before Drilling Pilot Holes
SBR 41
Wall Mount Template
Screw Distance from Edge 3
3/8
” (85 mm)
MOUNTING TEMPLATE
B
A
3/8''
3/8''
3/8''
B
A
