Origin Acoustics SBR41, Руководство по установке

Страница: 7 / 12

11 10
SOUNDBARS INSTALLATION USER MANUAL SOUNDBARS INSTALLATION USER MANUAL
Extending the Soundbar to Match TV Length
To perfectly align to the TV length, each soundbar can be extended by 1'', before
securing to the wall. This is done by extending the screw caps by up to 1/2 inch
on each end of the soundbar. Make sure to center the screws on the wall before
you prepare to extend the soundbar. Take off the logo-engraved magnetic cover,
on each end-cap, and use a drill, to loosen the the two screws on each end of the
Soundbar:
1. Once the logo-engraved cover is off (See Diagram 5), use the a drill with a
phillips head, anticlockwise, to loosen & extend the sounbar end-cap. Several
possible adjustments can be made to provide the best match to the exact TV
length.
2. Alternate adjustments between the 2 screws, to make sure the angles of the
end caps stay parallel.
3. Once extended fully, each end cap will reach an additional 1/2'', if a longer
length adjustment is desired, take off the second end cap, and repeat the process
to reach an addition 1/2'' length in size.
To shorten the length, use the drill, clockwise, to re-righten the cap.
Making Small Length Adjustments:
SBR43-75
SBR43-55
SBR41
SBR41-LCR
SBR43-75
SBR43-55
SBR41
SBR41-LCR
SBR43-7
5
SBR43-55
SBR4
1
SBR4
1-L
CR
Clockwise to tighten/shorten Anti-clockwise to loosen/lengthen
TV
SBR43-75
SBR43-55
SBR41
SBR41-LCR
SBR43-75
SBR43-55
SBR41
SBR41-LCR
SBR43-75
SBR43-55
SBR41
SBR41-LCR
1/2'' 1/2''
Diagram 5