Orientalmotor CSK243-ATA Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 48

background image

7 Setting

−

33

−

7 Setting

This section covers the selection and settings of driver functions.

Note

•

Be sure to shut off the power before using the resolution select switch.
The new resolution takes effect when the power is turned on again.

•

The driver may malfunction or become damaged due to the effects of
static electricity. While the driver is receiving current, handle the driver
carefully and do not come near or touch the driver.

•

When operating a function switch, jumper socket or current adjustment
potentiometer, be sure to use an insulated screwdriver.

7.1 Automatic current cutback function

Set the automatic current cutback function using the automatic current cutback
function switch (jumper socket).
When the automatic current cutback function is ON, the motor current will
automatically drop to the standstill current in approx. 0.1 second after the stopping
of pulse output. This mechanism suppresses heat generation from the motor or driver
while the motor is at standstill.
Keep the automatic current cutback function ON in normal conditions of use.

CSD2109-T

,

CSD2112-T

,

CSD2120-T

CSD2140T

,

CSD2145T

Automatic current cutback function switch
(ACD)
Factory setting: ON (enable)

Automatic current cutback function jumper
socket (C.C./A.C.D.)
Factory setting: A.C.D. (enable)

•

Set this switch to ON to enable the
automatic current cutback function.

•

Set this switch to OFF to disable the
automatic current cutback function.

Change the jumper sockets.

•

Set the jumper socket to A.C.D. to
enable the automatic current cutback
function.

•

Set the jumper socket to C.C. to disable
the automatic current cutback function.

ON

OFF

ON: enable
OFF: disable

ACD

Jumper
socket

«
...
31
32
33
34
35
...
»

Содержание CSK243-ATA

















































Отзывы:

Нет отзывов

Похожие инструкции для CSK243-ATA

Бренд: O.S. engine Страницы: 21

Бренд: Exalto Страницы: 28

Бренд: Simple Motors Страницы: 10

Бренд: Nanni Страницы: 24

Бренд: Tanaka Страницы: 10

Бренд: Kohler Страницы: 4

Бренд: O.S. engine Страницы: 15

Бренд: Hatz Diesel Страницы: 48

403F-E17T 404F-E22T

Бренд: Perkins Страницы: 108

GARDEN SNOWBUSTER (160F)

Бренд: Texas Страницы: 33

Бренд: Sesame Motor Страницы: 4

Бренд: Rotax Страницы: 84

Бренд: Rotax Страницы: 166

Бренд: YS Performance Страницы: 2

Бренд: CAME Страницы: 64

Бренд: Honda Страницы: 48

Бренд: Honda Страницы: 60

Бренд: New Holland Страницы: 41

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды