15
Accessories (sold separately)
Connection cable
This cable is used to extend the wiring distance between the driver and motor.
Connection can be extended to a maximum of 20.4 m (66.9 ft.). Up to three
connection cables can be connected consecutively.
Flexible connection cables are also available.
•
z
Standard type
•
Connection cable
•
Flexible connection cable
Length [m (ft.)]
Model
Length [m (ft.)]
Model
1 (3.3)
CC01BLE
1 (3.3)
CC01BLER
2 (6.6)
CC02BLE
2 (6.6)
CC02BLER
3 (9.8)
CC03BLE
3 (9.8)
CC03BLER
5 (16.4)
CC05BLE
5 (16.4)
CC05BLER
7 (23.0)
CC07BLE
7 (23.0)
CC07BLER
10 (32.8)
CC010BLE
10 (32.8)
CC010BLER
15 (49.2)
CC015BLE
15 (49.2)
CC015BLER
20 (65.6)
CC020BLE
20 (65.6)
CC020BLER
•
z
Electromagnetic brake type
•
Connection cable
•
Flexible connection cable
Length [m (ft.)]
Model
Length [m (ft.)]
Model
1 (3.3)
CC01BLEM
1 (3.3)
CC01BLEMR
2 (6.6)
CC02BLEM
2 (6.6)
CC02BLEMR
3 (9.8)
CC03BLEM
3 (9.8)
CC03BLEMR
5 (16.4)
CC05BLEM
5 (16.4)
CC05BLEMR
7 (23.0)
CC07BLEM
7 (23.0)
CC07BLEMR
10 (32.8)
CC010BLEM
10 (32.8)
CC010BLEMR
15 (49.2)
CC015BLEM
15 (49.2)
CC015BLEMR
20 (65.6)
CC020BLEM
20 (65.6)
CC020BLEMR
Regeneration unit
If vertical drive (gravitational operation) such as elevator applications is
performed or if sudden start-stop operation of a large inertial load is repeated
frequently, connect the regeneration unit
EPRC-400P
.
Model:
EPRC-400P
Data setter
The data setter lets you set data and parameters for your
BLE
Series
FLEX
RS-485 communication type with ease and also functions as a monitor.
Model:
OPX-2A
Communication cable for the support software
Be sure to purchase the communication cable for the support software when
connecting a driver to the PC in which the
MEXE02
has been installed.
This is a set of a PC interface cable and USB cable. The cable is connected to
the USB port on the PC.
Model:
CC05IF-USB
[5 m (16.4 ft.)]
The
MEXE02
can be downloaded from Oriental Motor Website Download
Page. Also, the
MEXE02
is provided in the form of a storage medium. For
details, check out our web site or contact your nearest Oriental Motor sales
office.
DIN rail mounting plate
When mounting the driver to a DIN rail, use a DIN rail mounting plate.
Use a DIN rail 35 mm (1.38 in.) wide.
Model:
PADP03
Regulations and standards
This product is recognized by UL under the UL and CSA standards.
Recognized name is motor model name and driver model name.
The product is affixed the CE Marking under the Low Voltage Directive.
UL Standards and CSA Standards
Applicable Standards Certification Body
Standards File No.
Motor
*
UL 1004-1
CSA C22.2 No.100
UL
E335369
Driver UL 61800-5-1
E171462
∗
*
Thermal class UL/CSA Standards: 105(A)
EU Directive
•
z
CE Marking
•
Low Voltage Directive
•
This product has been designed and manufactured for use as a component
to be installed in equipment.
•
This product cannot be used in IT distribution system.
•
Install the product inside an enclosure in order to avoid contact with hands.
•
When installing the motor and driver, securely connect their Protective
Earth Terminals.
•
Isolate the motor cable, power-supply cable and other drive cables from the
signal cables (CN3, CN5 to CN8) by means of double insulation.
Applicable Standards
Motor: EN 60034-1, EN 60034-5, EN 60664-1, EN 60950-1
Driver: EN 60950-1, EN 61800-5-1
Installation conditions (EN Standard)
Motor
*
1
Driver
For incorporating in equipment
Overvoltage category:
Ⅲ
*
2
Pollution degree: 3
Protection against electric shock:
Class
Ⅰ
For incorporating in equipment
Overvoltage category:
Ⅱ
Pollution degree: 2
Protection against electric shock:
Class
Ⅰ
*1∗
Thermal class EN Standards: 120(E)
*2∗
Overvoltage category II when EN 60950-1 is applicable.
•
EMC Directive
This product has received EMC compliance under the conditions specified
in "Example of motor and driver installation and wiring" on the USER
MANUAL. Since the compliance of the final machinery with the EMC
Directive will depend on such factors as the configuration, wiring, layout and
risk involved in the control-system equipment and electrical parts, it therefore
must be verified through EMC measures by the customer of the machinery.
Applicable Standards
EMI
Emission Tests
EN 55011 group1 classA
EN 61000-6-4, EN 61800-3
EMS
Immunity Tests
EN 61000-6-2, EN 61800-3
Caution: This equipment is not intended for use in residential environments
nor for use on a low-voltage public network supplied in residential
premises, and it may not provide adequate protection to radio
reception interference in such environments.
A temperature test has been conducted with a heatsink plate. The size,
thickness and material of the heatsink plates are as below table.
Motor model
Size [mm (in.)]
Thickness
[mm (in.)]
Material
BLEM23
115×115 (4.53×4.53)
*
5 (0.20)
Aluminum alloy
BLEM46
135×135 (5.31×5.31)
BLEM512
165×165 (6.50×6.50)
∗
*
Electromagnetic brake type: 135×135 mm (5.31×5.31 in.)
