1 Introduction
－
2
－
1 Introduction
1.1 Compliance with the EC Directives
The CE Mark indicating their compliance with the Low Voltage/EMC Directives.
•
Installation condition
EZS
K
EZS
A
,
EZS
C
Overvoltage category
Ⅰ
Ⅱ
Pollution degree
2
Protection against
electric shock
Class
Ⅲ
equipment Class
Ⅰ
equipment
Degree of protection
IP20
Noise level
71 dB
•
Environmental condition
Operation environment
Storage environment Shipping
environment
Ambient
temperature
0 to +40 °C
(32 to +104 °F)
(non-freezing)
0 to +50 °C
(32 to +122 °F)
(non-freezing)
-20 to +60 °C
(-4 to +140 °F)
(non-freezing)
Ambient
humidity
85% or less (non-condensing)
Altitude
Up to 1000 m (3300 ft.) above sea level
Up to 3000 m (10000 ft.)
above sea level
Surrounding
atmosphere
•
Area that is free of explosive atmosphere or toxic gas (such as sulfuric gas) or liquid
•
Area not exposed to direct sun
•
Area free of excessive amount of dust, iron particles or the like
•
Area not subject to splashing water (rains, water droplets), oil (oil droplets) or other
liquids
•
Area free of excessive salt
•
Area not subject to continuous vibration or excessive shocks
•
Area free of excessive electromagnetic noise (from welders, power machinery, etc.)
•
Area free of radioactive materials, magnetic fields or vacuum
Low Voltage Directive
EZS
K
EZS
A
,
EZS
C
Applicable
Standards
The
EZS
K
is not subject to the Low
Voltage Directive, because its input voltage
is 24 VDC.
EN 60950, EN 60034-1, EN 60034-5,
IEC 60664-1
EMC Directive
EMC of this product has been measured in combination with a linear motion controller. Be sure to measure
EMC of the applicable equipment after installing this product, by referring to “Installing and wiring in
compliance with EMC Directives” in the Linear Motion Controller OPERATING MANUAL.
Machinery Directive
Motorized linear slides is designed and manufactured for use as an internal component for general industrial
equipment, and therefore need not comply with the Machinery Directive. Nonetheless, they are evaluated
under the following standards:
Applicable Standards: EN ISO 12100-1, EN ISO 12100-2, EN 1050, EN 60204-1
