3 Connection
－
6
－
3 Connection
Connect one end of the motor cable (sold separately) to the motorized linear slides, and connect the other end
to the motor connectors on the controller.
Motorized linear slides
Controller
Motor cable (sold separately)
3.1 Confirmation of controller key designation
Be sure to confirm that the motorized linear slides model shown on the controller key is the same as the
model of the motorized linear slides connected to the controller. If the two do not match, the motorized linear
slides cannot be operated according to the specification.
When you purchased a motorized linear slides only, install the supplied controller key on a controller to be
connected. For details, refer to “Controller key” in the Linear Motion Controller OPERATING MANUAL.
Controller key
Motorized linear slides
model
3.2 Connection of motor cable
The motor cable is optional (sold separately).
1.
Loosen the screws affixing the end plate, and remove the end plate.
End plate
End plate mounting screws
Cable clamp
Protective earth terminal
Motor connectors
Power unit (Motor built-in)
