5
GETTING STArTED
3 Getting Started
NOTE:
YOU MUST INITIALLY CHARGE THE BATTERIES FOR
12-14 HOURS BEFORE USE. THIS IS IMPORTANT TO
MAINTAIN ADEQUATE BATTERY PERFORMANCE.
3.1 Baby unit power supply
(1) Connect the power adaptor with microUSB to the baby
unit.
Only use the AC power adaptor supplied with the product
as other power adaptors could damage the product.
This product is designed for indoor use only.
!
Warning
3.2 Turn on/off the Parent unit
(1) Insert batteries into the battery compartment.
(2) Close the battery compartment.
(3) Press and hold <POWER> button for 2 seconds to
switch on the parent unit. It will take a few seconds to
start up the unit. The LCD will display Oricom loading
screen.
(4) Press and hold <POWER> key for 2 seconds again to
turn OFF the parent unit.
NOTE:
When the battery level is low, the LCD will show the battery
empty icon, which will flash.
3.3 Charge the Battery on the Parent unit
(1) Connect the Micro USB power adaptor to the parent
unit and other end to the mains power.
(2) Battery icon with lightning symbol is shown on the LCD.
Battery Life
The rechargeable batteries (supplied) can be charged and
discharged hundreds of times, however they will eventually
wear out and lose their ability to hold a full charge. When
the in-use time becomes noticeably shorter than normal, it
is time to purchase new batteries.
How to purchase spare parts
You can purchase batteries (Part number: 2B0109),
and extra camera units from Oricom www.oricom.com.au
Only use Rechargeable Nickel Metal Hydride batteries in
this product, as any other type may cause damage.
!
Warning
