11
uSING ThE BABy mONITOr
Picture on parent unit not displaying
correctly
− Switch off parent unit then camera unit. Wait 10 seconds. Switch on the camera
unit then parent unit (in that order)
Battery not charging
− Check batteries and battery connections are clean and free of corrosion.
− After a period of time, the batteries may need to be replaced due to everyday
usage. Please visit www.oricom.com.au to purchase replacement batteries.
Parent unit beeping
Move the parent unit closer to the baby unit until they are within range.
No picture after 10 seconds
VOX function is activated. Turn off VOX if required. During battery operation,
VOX cannot be turned off.
Picture changes every 10 seconds
Scan function is on. Turn off the scan function.
6 Technical Specifications
Technical data
Feature
Value
Camera
(baby unit)
Micro USB: 5 V DC
Sensor: 1 night light sensor
IR diodes: 4pcs
Monitor
(parent unit)
Screen: 2.4" LCD display
Micro USB: 5 V DC
Battery Pack for Parent unit
Rechargeable 2 x AA 800mAh NiMH batteries
Power supply (parent unit)
AC Power adaptor, input: 100-240 V AC, 50-60 Hz, 150 mA
Power adaptor plug, output: 5 V DC, 1.0 A
Battery performance
Up to 8 hours of continuous operation when new battery is fully charged, with
VOX turned on.
