39
Troubleshooting
Should you experience difficulties operating the SC520 please refer to
the troubleshooting guide below. If you still experience difficulties please
contact Oricom Customer Support on 1300 889 785 for assistance.
Troubleshooting
Problems
Solutions
Parent Unit is
beeping
Please see page 37 for the list of tones the Parent
unit makes. The Parent unit will beep for a number of
reasons:
− The link has been lost between your units, see
page 15-16. Check that the Baby unit Link indicator
is illuminated. If not, please ensure that the power
adapter is still connected and if this still does not
switch on, please test in a different electrical socket.
− The feed timer has been set, see pages 29-32.
− The crying alert is switched on, see page 36.
− The temperature alert has been triggered, see pages
32-35.
− The batteries are low, see pages 13-14.
− The Find button has been pressed on the Baby unit,
see page 23.
If the Parent unit still beeps after checking the points
opposite, please try switching the Baby unit off at
the power for approximately 30 minutes. Ensure the
Parent unit is clean by wiping with a damp cloth. If the
problem persists call the Oricom Customer Support
for advice.