30
The timer can be set from
1 minute to 99 hours 59
minutes.
If the Parent unit is switched
off, the feed timer countdown
will be cancelled and you will
need to start it again when
the unit is switched back on.
The duration, alert type and
repeat settings will still be
retained.
3. The display will show
02h:00m
(or the
currently set timer). Use the and buttons
to select the first digit and press
. Repeat
this procedure for each digit and press
.
The display will show Saved and you’ll hear a
confirmation beep.
Start the feed timer countdown
1. Press
.
Lightshow
is displayed, press
until
Feed
Timer
is displayed and press
.
2.
Start?
is displayed, press
. The display
will briefly show
Timer
On
and then the timer
will be shown counting down the seconds from
the time you set.
When the timer has finished counting down
to
00:00
you will hear an alert beep and the
timer and
icon will flash. Press any button
on the Parent unit to stop the alert. If you do
not stop the alert it will automatically stop after
2 minutes (or it will start again if Timer Repeat
has been set to On).
Using your SC520 Digital Baby Monitor