15
Setting up
Baby unit
1. Plug the remaining power adaptor cable into
the socket marked on the back of the Baby
unit and plug the other end into the mains
power and switch on.
Switch on and link the Parent and
Baby units
1. Press and hold the
button on the Baby unit
until the nightlight briefly illuminates and the
green Link indicator flashes.
2. Press and hold the
button on the Parent
unit until all the LEDs on the unit briefly
illuminate.
The green Link indicator will flash and the
display will show
I’m Linking
.
Positioning your units
The Baby unit should ideally
be within 1m-2m of your
baby for best performance.
Make sure both the Baby
unit and mains power cable
are connected securely and
positioned out of baby’s
reach.
If you place the Parent
and Baby units too close
together you will hear a high
pitched noise, this is normal.
The units are designed to be
located at a distance from
one another, e.g. in separate
rooms.