23
PHone settInGs
You can register additional handsets to have up to five handsets
per base unit, with each handset's number (1 to 5) shown on its
display. (Note: each handset can only be registered to one base.)
To register a new handset to your base:
1. Press and hold <PAGE> on the base station for more than five
seconds, to put the base station into registration mode. It will
stay in registration mode for about 1 minute, so the following
handset sequence must be completed within this time.
2. Press <MENU/OK> and <UP/DOWN> to select
REGISTRATION
.
3. Press <MENU/OK> to display “PIN?------”.
4. Enter the 4-digit system PIN (default 0000).
5. Press <MENU/OK> to confirm, and the display will show
SEARCHING.
If the handset registration is successful, you will hear a
confirmation tone and the <antenna icon> will stop flashing.
The handset will automatically be allocated the next available
handset number. This handset number is shown in the
handset display in standby mode. If the handset registration is
unsuccessful, the <antenna icon> will still flash.
Reset Your Phone
You can reset your phone to the default settings. After a reset,
all your personal settings, call list entries, redial list entries, and
answering machine messages will be deleted but your phonebook
remains unchanged.
1. Press <MENU/OK> and <UP/DOWN> to select
DEFAULT
.
2. Press <MENU/OK> to display “PIN?-----”.
3. Enter the 4-digit system PIN (default 0000).
4. Press <MENU/OK> to display “CONFIRM”?
5. Press <MENU/OK> to confirm, and the phone will be reset to its
default settings.