![Oregon Scientific OS5851L-BR Скачать руководство пользователя страница 29](http://html1.mh-extra.com/html/oregon-scientific/os5851l-br/os5851l-br_user-manual_1649351029.webp)
25
EN
SOUND SIGNALS
A long warbling tone
Signals an incoming call
Single Tone
A key is pressed
Three short beeps
Error tone
Two long beeps
Confirmation tone
One short beep and one long beep Page signal
Three beeps every 2 seconds
Transfer signal
Two short beeps every 15 seconds Low battery warning
CALLER ID
No display
•
Is battery fully charged? Try replacing the battery.
•
Make sure that the base is connected to a non-switched AC outlet.
Disconnect the base from the plug and plug it in again.
•
Did you order Caller ID service from your local telephone company?
The display will not work unless you do this.
Caller ID error message
•
The phone displays this message if it detects anything other than valid Caller ID
information during the silent period after the first ring. This message indicates
either the presence of noise on the line, or that an invalid message has been sent
from the telephone company.
TROUBLESHOOTING
NEW CALL
NO CALLS
NO DATA
REPT
UNKNOWN NUMBER/
NAME/CALLER
PAGING
RINGER=OFF
Indicates call or calls have not been reviewed.
There are no Caller ID records stored to memory.
No Caller ID information was received.
Repeat call.
The incoming call is from an area not serviced by Caller ID, or the
information was not sent.
Someone has pressed the PAGE key on the base.
Ringer ON/OFF switch on the right side is set to OFF.
086L004968-026
29/75
REV:1