EN
BASICS
Channel No.
Call Timer
Volume Level
Telephone Number
RESETTING TO DEFAULT
You can reset the phone programming to the initial factory default settings. The default set-
tings are:
Language
Portuguese
Area Code
- - -
Ringer Tone
Tone/Pulse Setting
Tone
1. Make sure the phone is OFF (not in TALK mode).
2. Press
FLASH/PROG
repeatedly until “
DEFAULT 1 NO
” shows on screen.
3. Press
CID
or
, or the
1
or
2
keys to select your choice between “1 NO” and “2
YES” for Default Settings”
4. Press
FLASH/PROG
again to confirm. You will hear a confirmation tone.
RECEIVING A CALL
When receiving an incoming call, the LED on the handset flashes, and the handset will
show caller information. *
Note:
A subscription is required from your local phone company to receive Caller ID
information on your phone. See
Caller ID Features
, page 12.
1. Press
TALK
to answer the call.
Note:
If handset is in the base cradle, remove it from base before pressing the
TALK
key.
2. Press
TALK
to end your call.
Note:
If you replace the handset to the base cradle or charger cradle, the handset
automatically hangs up.
MAKING A CALL
1. Press
TALK
.
Note
: If handset is in the base cradle,
remove it from base before pressing
the
TALK
key.
2. Dial the phone number.
3. Press
TALK
to end your call.
086L004968-026
13/75
REV:1
