3
EN
STORING CALLER ID ENTRIES IN THE DIRECTORY
Before storing a caller ID number, make sure the number appears in proper digits for your
dialing area. If not, change it using the
MUTE/FORMAT
key.
Note:
If a specific memory entry is longer than 15 digits, the last 15 digits show on the
screen.
1. Use the
CID/VOL
or
key to select desired Caller ID entry.
2. Press
MEM
key, “MEMO # --” shows on the top right corner of screen.
3. Select the desired memory location by pressing the number keys (0-9).
4. If the memory location already contains name and number information,
“REPLACE MEMO?” will show on screen. Press
MEM
again if you want to replace
the information and save. Press
*TONE/EXIT
button to return unit to standby mode
without saving.
5. If the selected memory location is empty, you will hear a confirmation tone when the
new memory record is saved.
Note:
If the selected CID record contains non-digit characters, or the number is more than
24 digits, the unit will not store the record.
DIALING A CALLER ID NUMBER
1. Make sure the phone is OFF (not in TALK mode).
2. Use
CID
or
to scroll to the desire Caller ID entry.
3. Use
MUTE/FORMAT
key to display the phone number in proper digits if necessary.
4.
Press
TALK
.The number dials automatically.
DELETING ENTRIES FROM THE CALLER LIST
Use
CH/DEL
to erase the entry currently shown on screen or all entries.
DELETING THE DISPLAYED ENTRY
1. Make sure the phone is OFF (not in TALK mode).
2. Use the
CID/VOL
or
keys to find the entry you want to delete.
3. While the entry is displayed, press
CH/DEL
. “DELETE?”
shows on screen.
4. Press
CH/DEL
again to delete the entry. Confirmation tone sounds and LCD shows
“DELETED” for 2 seconds.
DELETING ALL ENTRIES
1. Make sure the phone is OFF (not in TALK mode).
2. Use the
CID/VOL
or
keys to
display any entry.
086L004968-026
17/75
REV:1
