21
EN
HEAR THE CURRENT TIME
Press
TIME
to hear the current time. The voice prompt will announce the day and time.
ADJUST THE VOLUME LEVEL
During announcement or messages playback, press or to increase or decrease the
volume.
Note:
In Standby mode, the volume level (0 to 7) will be displayed.
SETUP THE REMOTE ACCESS CODE
The remote access function allows you to remotely check your messages from any
external line. To retrieve the messages you need to enter a 4-digit remote access code.
1. Press
MENU
and use
or
to navigate to the remote access code submenu. The
voice prompt will say “Set remote access code” and
will show.
2. Press
MENU
, the voice prompt will announce the current code and the first 2 digits (‘00’
to ‘99’) of the code will show with one digit blinking.
3. Press
or
to set the value of the blinking digit.
4. Press
MENU
to confirm. Repeat steps 2 and 3 to set the other digits of the access
code. When the four digits are defined, the voice prompt will confirm the access code
set.
5. Press
MENU
to confirm and exit to standby mode.
Note:
The default remote access code is 0000.
REMOTELY ACCESS THE ANSWERING MACHINE
1. Dial your number and wait for the answering machine to pick up.
2. While the announcement message is playing, dial # followed by the remote access
code.
3. To listen to your messages, dial the number of the mailbox (1, 2 or 3). For other
remote functions, please refer to the table below.
086L004968-026
25/75
REV:1
