2
GB
DESCRIPTION OF PARTS
BACK VIEW
ALT
DOWN HISTORY
STAND
LCD DISPLAY
UP
FRONT VIEW
°C / °F SWITCH
RESET
STAND COMPARTMENT
HANGER HOLE
VENTILATION SLOT
BATTERY COVER
mb(hPa)/inHg SWITCH
INSTALLING AND REPLACING
BATTERIES
The unit uses four UM-4 ‘ AAA’ size batteries. If the
‘BATT‘ indicator appears, removes the exhausted batteries
and follow these steps to install or replace the batteries:
1. Lift and pull up the top center edge of the battery
compartment cover, then remove the cover.
2. Insert the batteries as indicated by the polarity symbols
( + and - ) marked inside the battery compartment.
3. Replace the battery compartment cover.
Note:
After replacing the batteries, the whole display
will be turned on for about 3 seconds and then
show the following:
a, Indoor temperature shows the current reading.
b, Indoor relative humidity shows the current reading.
c, Weather forecast shows slightly cloudy ( a sun shows
with the cloud indicator )
d, Pressure trend shows steady.
e, Barometric pressure shows the current reading.
The unit takes about 24 hours to store the barometric pres-
sure data. Until that time has elapsed, the pressure trend and
weather forecast symbols may not reflect actual weather
forecast for your area.
