OREC America RM98 Скачать руководство пользователя

Страница: 47 / 50

noticeably dirty.

Transmission

Abnormal noise, strange
heat/movement

There are no abnormalities,
strange noises or heat, when
running the machine.

Oil quantity, cleanliness

There is a suitable quantity
of oil and it is not dirty.

Oil leakage

Oil seal, packing parts are
not leaking oil.

Brake Device

Brake

Parking brake working
condition

The brake works well, there
is no dragging.

Give

There is suitable give of the
parking brake pedal.

Damage of rod and wire,
loosening, cracking,
missing split pin

There is no damage,
loosening, or cracking.

Body

Cracking or deformed
nuts and bolts are loose
or have fallen off

The frame is not cracked or
deformed. There is no
loosening and missing of
bolts / nuts.

Cover

Cracking, deformity,
corrosion

The cover is not cracked,
deformed, or corroded.

Moving Parts

Condition of levers and
wires

It is a smooth operation,
There is enough oil.

Gear

Gearshift

Operation condition

There are no abnormalities
when operating.

Loosening, grinding
noise

The lever mounting position
is correct.

Drive

Tires (Wheels)

Air pressure and tread
depth

Standard values are
observed.

Cracking, damage, wear
and tear

No cracks, damage or wear
and tear.

Metal, stones, etc. stuck
in the tires

There is no debris in the
tires.

Loose or missing nuts
and bolts

Nuts and bolts are not loose
or missing.

Rattling, strange noise

Mounted parts do not rattle
and are not missing

Cutting

Blade and Stay

Deformity, cracking, wear
and tear of the blade and
stay

Blade is not worn out,
missing, or warped.

Mounting condition of the
blade

Nuts and bolts are not loose,
worn out or missing.

Blade brake

Blade brake works well
(stops within 5 seconds).

Safety

Labels*

Damage/unreadable

Warning labels and
nameplate are attached and
not damaged.

Reflective plate

Damage, missing

There are no missing parts.

*For new labels, please consult with your local retailer (charges apply).

Содержание RM98



















































Результаты поиска

Содержание RM98

Отзывы:

Похожие инструкции для RM98

Бренды по названию

Популярные бренды

OREC America RM98, Руководство по эксплуатации

Результаты поиска

Содержание RM98

Отзывы:

Похожие инструкции для RM98

Бренды по названию

Популярные бренды